Diese Website verwendet Cookies, um bestimmte Funktionen zu ermöglichen.
Mit der Nutzung unserer Seite erklären Sie sich damit einverstanden.
Weiters gilt für sämtliche, über Formulare auf dieser Website übermittelten Daten unsere Datenschutzerklärung


Surfaces



Wood

Wood is a core component of many pieces of Wittmann furniture. Since it is a natural material it has a characteristic grain. Most of our timber is sourced from European forests. Every solid wood element and veneer log has a unique colour and structure which also changes with exposure to light. When staining wood the final colour can always take on a slightly different appearance. This is a feature of the natural material and does not constitute grounds for complaint.
For regular care of stained, varnished and natural wood surfaces we recommend wiping with a soft, dry lint-free cloth. If necessary, e.g. to remove finger prints and other marks, wipe with a damp cloth (a mild household detergent can be added to the water, but only spray on to the cloth and never directly on to the surface!). Then wipe with a dry cloth to remove any residual moisture. To ensure that surfaces are protected, deep cleaned and given a new lease on life we recommend applying a furniture polish twice a year after cleaning. Always read the manufacturer’s instructions. Do not use aggressive cleaning products containing additives such as ammonia, alcohol, softeners or any detergents with scouring agents.

Aluminium and special steel

Clean with a soft cloth and mild soap solution, or a specialist cleaning product(solvent free to avoid damaging the protective coating).


Linoleum

Clean with a damp but well wrung-out cloth, using highly-diluted soapy solution if necessary.

HPL board

HPL board (high pressure laminate): Clean with glass cleaner and an absorbent cloth.


Chrome and nickel surfaces

Chrome and nickel surfaces are galvanised, and can crack or splinter on impact. Protect chrome surfaces from mechanical damage such as friction or bumping. Clean with a soft cloth or a specialist cleaning product.

 


Basic Stonecleaner

frees natural stone surfaces from fat, oil, wax, rust and residue from care products.

Usage: Depending on degree of staining, dilute with water at a ratio of between 1:1 and 1:50. Apply to surfaces with a sponge or cloth, allow to work for 15 minutes, then remove residue with a sponge.

Rinse with clean water. Do not allow the Basic Stonecleaner to dry out. Keep out of reach of children. Avoid any contact with the eyes. For use on marble, natural stone and artificial stone only.

FlecKstoP “W”

penetrates deep into the stone and provides resistance to water, dirt and oil for several years.

Usage: Do not dilute. shake before use. surfaces to be treated must be dry and clean. spread evenly with a brush or sponge, then leave it to soak in. on highly absorbent surfaces, repeat after 30 minutes.

Completely remove any excess within 30 minutes. Treated surfaces can be used after 2-4 hours, and are completely protected within 24-48 hours. Keep out of reach of children. avoid any contact with the eyes. Wear protective gloves while working. only for use on marble, natural stone and artificial stone.

 

Consult your furniture dealer for recommended care products.